Occasionally we get asked “Why should I buy from you, what makes you better than the others?”.  That is the topic of today’s blog.  At first I thought it would be short and sweet, but after doing some research I discovered I was wrong.  I thought we had 1 or 2 unique things going for us, primarily stainless steel; turned out we have several. Here are some of the reasons we feel we stand out from the rest.

Let’s start out with our mounts.  They are made from 1″ steel tubing and are welded together for a solid one piece unit.  We then base coat and prime them with  high temperature ceramic paints so they’re ready for your paint with no prep.  Our exclusive Teflon washer allows for free spinning and long life.  Our tails are made from high quality aircraft grade aluminum and come with stainless steel hardware.

Of course our PMA’s are made from new parts.  We were the first in the industry to use the three phase ac output and offer a heavy duty external rectifier that everyone is now copying.  Imagine that. We clear coat them inside and out before assembly for maximum weather protection.  No need to stick a spray can through the holes and hope for the best.  We were the first to come out with a stainless steel shaft.  Ours are custom made with standard threads so there is no need hunt for a “GM” nut if you happen to lose yours.  The washers and nuts that come with our PMA’s are stainless also.  We use the highest  quality bearings.  They have an  extreme temperature grease that provides protection from -40F to 392F   (-40C to 200C).  The needle bearings have a load dissipating viscosity that protects against mechanical shock.  Which brings me to our TLG Blades.

The TLG CyClone blades are aircraft grade aluminum and we supply them with stainless steel hardware.  The hub is stainless steel, another WindBlue exclusive.  And we balance each set.  I thought this was a given until I found out that some companies are known to have unbalanced blades.  That is why we sell sets only.

If you purchase our Complete Kit you get another WindBlue exclusive: stainless steel spacer, washer and nylock nut.

We are an ‘in house’ company.  Our mounts are manufactured and our PMA’s assembled on site.  We do not farm anything out nor do we claim another’s products as our own.  We strive to buy American made.

Last but certainly not least is the WindBlue Warranty.  We offer a full refund within 90 days of purchase.  On ALL of our inventory, even electronics.  And we do not charge a restocking fee, as some do.  Our only restriction is that the parts are unaltered and the PMA has not been taken apart.   For example, if you cut the tabs off or drill out the mounting holes in a PMA, then decide you don’t want it, we have the right to refuse your refund.  But even if you  would do this and find the PMA to be defective we would honor the refund.  We are not looking for loopholes to deny you your money, just trying to be fair.

These are some of the things that make us stand out from the rest.  We are constantly looking for ways to upgrade our improve so in the future you will have even more reasons to shop at WindBlue Power.

Thank you and I’m looking forward to your comments